|
Elements
|
All the elements data will be put to the RAM |
|
Nodes
|
All the nodes data will be put to the RAM |
|
Load cases
|
All the load cases data will be put to the RAM |
|
Result data base open/close
|
Optimization of result data base open/close If the option is activated, the result data base will be opened and closed only once in each stage. |
|
C+S calculation using RM Bridge code
|
The predefined 'C+S' variables are implemented directly into the RM Bridge code. Bypassing the variable definitions increases the processing speed
|
|
Total space (MB)
|
Input of memory available for RM (MBytes) There should be enough memory left for the operating system (ca. 50-100 MB)
All the elements data will be put to the RAM
|
|
Nodes
|
All the nodes data will be put to the RAM |
|
Load cases
|
All the load cases data will be put to the RAM |
|
Result data base open/close
|
Optimization of result data base open/close If the option is activated, the result data base will be opened and closed only once in each stage. |
|
C+S calculation using RM Bridge code
|
The predefined 'C+S' variables are implemented directly into the RM Bridge code. Bypassing the variable definitions increases the processing speed
|
|
Total space (MB)
|
Input of memory available for RM (MBytes) There should be enough memory left for the operating system (ca. 50-100 MB)
|
